EDGE Frame
Benefits & Features
Four, 4-channel configurable I/O slots support an array of options including analog, digital, AEC and analog telephone cards support varied configurations.
On-board 10/100 and gigabit switches lower system cost and reduce complexity.
Edge’s Dante ports enable audio expansion over standard IT infrastructure. 64 transmit and 64 receive channels to connect to SymNet Edge, Radius or third-party hardware.
Multiple user control options include zero cost ARC-WEB browser based interface, low cost Symetrix ARC wall panels,easy to implement SymNet SymVue GUI, and programmable third-party touch screens.
Edge’s powerful DSP engine is configured using SymNet Composer open architecture software. Over 600 DSP modules provide ultimate design flexibility.
Product Details
SymNet Edge is a powerful, configurable, DSP frame with four 4-channel I/O slots. An array of I/O card options including analog, digital, and AEC tailor the system to specific project requirements. On-board 10/100 and gigabit switches lower system cost and reduce complexity with less hardware and fewer potential points of failure. Edge uses Dante to expand system capacity with additional SymNet Edge, SymNet Radius or third-party hardware. The customer gets what the customer wants with Edge’s user control options: zero cost ARC-WEB browser based interface, low cost Symetrix ARC wall panels, and easy to implement SymNet SymVue GUI.
Specifications
Performance Data
INPUTS
Number of Inputs: Four (4) switchable balanced mic or line level.
Connectors: 3.81 mm terminal blocks.
Nominal Input Level: +4 dBu with 20 dB of headroom.
Maximum Input Level: +23 dBu.
Mic Pre-amp Gain: 0, 11.8, 24, 44 or 54 dB switchable with ± 24 dB trim.
Mic Pre-amp EIN: < -127dB with 150 ohm source impedance.
CMRR: > 76 dB @ 1 kHz, unity gain.
Input Impedance: 8k Ohms balanced, 4k Ohms unbalanced.
Phantom Power (per input): +48 VDC @ 10 mA maximum.
Dynamic Range: > 115 dB, A-weighted.
THD + Noise: < -94 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.
Latency: 0.28 mS
OUTPUTS
Number of Outputs: Four (4) balanced line level.
Connectors: 3.81 mm terminal blocks.
Nominal Output Level: +4 dBu with 20 dB of headroom.
Maximum Output Level: +24 dBu (+22.8 dBu into a 2k Ohm minimum load).
Output Impedance: 300 Ohms balanced, 150 Ohms unbalanced.
Dynamic Range: > 117 dB, A-weighted.
THD + Noise: < -95 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.
Latency: 0.60 mS
SYSTEM
Sampling Rate: 48 kHz, ± 100 ppm.
Frequency Response (A/D/A): 20 Hz – 20 kHz, ± 0.5 dB.
Dynamic Range (A/D/A): > 114 dB, A-weighted.
Channel Separation (A/D/A): > 108 dB @ 1 kHz, +24 dBu.
THD+Noise: < -85 dB (un-weighted); 1 kHz @ +22 dBu with 0 dB gain.
Latency (A/D/A): 0.88 mS, inputs routed to outputs.