网站首页 » 商品详情 » TELEX导播通话系统BTR-800,演播室无线内部通话系统MCE325,全双工无线内通系统

TELEX导播通话系统BTR-800,演播室无线内部通话系统MCE325,全双工无线内通系统
上一个商品 下一个商品

市场价: 15540.00
本店价: 12950.00
商品编号:M004149
我要买    库存有货,立即发出
分享
商品满意度:
5分
(共0个评论)
商品描述
商品参数
  • 品牌:TEXEX
  • 工程解决方案分类:公共广播
  • 货号:834708

美国TELEX导播通话系统BTR-800,演播室无线内部通话系统MCE325,全双工无线内通系统

三个指挥部全双工内部通话方案:其中1个无线方案,2个有线方案

 
 
美国TELEX专业全双工通话系统三个配置方案如下:
 
 
1.双工无线内通系统价格(配无线腰包):合计:175795元
MCE325主站:9035元 ,MCS325主站音箱单元:3960元,MCP-1支架:1850元,MCP-90-18鹅颈话筒:1920元,BTR800RTS基站*3台:38260元/台,TR800RTS无线腰包*3台:12950元/台,PH88R耳机(包括指挥室主站耳机)*4个:1350元。
 
2.双工有线内通系统价格(配有线腰包):合计:52195元
MCE325主站:9035元 ,MCS325主站音箱单元:3960元,MCP-1支架:1850元,MCP-90-18鹅颈话筒:1920元,PS15电源*3台:6100元/台,MCP2电源安装支架*3套:1450元/套,BP319有线腰包*3台:2460元/台,PH88R耳机*4个:1350元。
 
3.双工有线内通系统价格(配有线面板):合计:56545元
MCE325主站:9035元 ,MCS325主站音箱单元:3960元,MCP-1支架:1850元,MCP-90-18鹅颈话筒:1920元,MRT327通话分站*3台:5650元/台,MCS325主站音箱单元*3个:3960元/个,MCP-1支架*3套:1850元/套,PH88R耳机*4个:1350元。
 
 

      创新、优越的设计、高可靠性及耐用性,这些都是Telex RadioCom无线内部通讯系统的特点.Telex RadioCom无线内部通讯系统是在各类应用中最权威的无线通讯设备。RadioCom无线产品在世界各地是非常成功的. 应用领域包括电视广播、太空科技、工业、剧院、体育运动、流动演出、军事,学校、教堂和许多其他数之不尽的范围.
Telex RadioCom获得了多项创新发明奖项,例如RadioCom BTR-800 两通道可调频率的无线内部通讯系统,这些发明让使用者能随处走动的同时仍可保持有线系统通话的品质和可靠性.Telex加密的内部通讯技术已经被普遍使用于各高等院校.特别是NFL (美国国家职业橄榄球联盟)的训练. 同样的专利的加密技术还在世界各地的国家安全和军用事业上使用。
      BTR-800 无线腰包
每个基站配 4个腰包。每个BTR-800基站能支持多达4个腰包的全时间讯号传输和全双向操作。多组的基站和腰包系统结合起来,能满足世界上任何的无线通讯应用。
灵活的频率可调性
BTR-800革新的图形使用介面 ,可以使440个用户在频率中进行选择 ,频率选自厂方设定组,或者是选择以25KHz为增量的任何一个频率。从18MHz运行视窗中有720个 TX发射和720个 RX接收频率可供选择”。
      UHF 操作
BTR-800²TR-800 和TR-825 在 UHF 段中从470至740MHz 运行。基站和腰包操作在特殊的 18MHz 带宽运行。关于详细的运作频道情况,请与客户服务部联系。
免互调的工厂选择群组 每一台800系统都具有24个出厂选择,可互换的群组设置,这允许大部分不很了解产品使用的新用户在开箱后就能立刻开始使用。Telex己经为您完成所有的工作! 每个腰包都可用两个频道对讲通话 与BTR-800 的基站的有线连接,可以是2线4线或者是混合线。BTR-800 可以完全和Audiocom ,RTS和clearcom内部通讯有线系统相容。 双通道操作 每个TR-825 腰包能提供双通道两个声量调节;每个调节器独立控制每通道的电平。这能让一边耳机聆听制作人员² 另一边耳机则聆听技术人员的说话。TR-825可以双声道或单声道两种模式操作。
带继电器关闭的舞台通知输出 每个腰包都具有舞台通知的特性。用户的声音从基站背面的XLR3针输出。这个讯号不带电,线路的电平为+8dB,而且是可调整的。一个非常方便的继电器关闭能够触发两路无线电讯号,IFB导播发送,候演室扬声器或者一些其他的动态设备。

 

TELEX BTR800 and TR800无线内部通话系统

BTR800
全双工方式,一个基站允许接入四个腰包机
灵活的频率可调性
每个腰包都可用两个频道对讲通话
UHF操作
增强的ClearScan频道自动选择和图形使用界面
免互调的工厂选择群组
双聆听操作
TR800
带继电器关闭的舞台通知输出
无线巡回演讲(广播ISO)
“第五个人”在基站交谈或收听
智能电源控制
镀镁质的腰包
两种电池的选择
可拆离的腰包天线

TELEX MCE325可编程4通道用户通话主站

The MCE-325 is a four-channel, programmable intercom station. It may be used as a headset station or, with the addition of the MCS-325 Modular Speaker, as a speaker station. It may be mounted in a console or equipment rack via optional mounting kits. The MCE-325 can be used with either two-wire or four-wire intercom lines, or a combination of both. In the labeling on the MCE-325, references to channels 1, 2, 3, and 4 indicate two-wire lines; references to four-wire A and four-wire B indicate four-wire lines. The MCE-325 can be interfaced to a variety of external devices including external program sources, two-way radios, paging systems, and satellite circuits.
2 or 4 channel operation
Call Signaling
External Device Keying
Fully-Programmable
Panel mic and headset mic
Microphone Limiter
Remote "Talk Off"
2 channels of IFB
2 PGM inputs
 
Call Signaling
Call signaling is accomplished using an inaudible (20 kHz) signal to activate a call indicator LED.
Remote "talk-off"
Active, unattended remote station microphones may be deactivated by momentarily injecting an inaudible (24 kHz) signal into the corresponding intercom line. The MCE-325 can send and receive "talk-off" signals.

VOX circuit
The MCE-325 may be programmed for voice activation of the microphone.

Simple IFB
Program audio assigned to a channel is interrupted during talk.

External device keying
External devices, such as two-way radios, speaker mute relays, or paging systems may be activated through key outputs at the auxiliary connector on the rear panel. The key outputs may also be used to expand the simple IFB function, allowing any one of a number of MCE-325 stations to interrupt the program source and talk on the line.

Microphone Limiter
The microphone preamplifier circuit contains a limiter, which helps to equalize voice levels.

Fully programmable
Retains programming even when power is shut off.

Instantaneous Auto-Reset
Instantaneous Auto Reset (IAR), the newest technology in performance and safety, which uses a revolutionary new circuitry that dynamically monitors line fault conditions. Then, when the fault is removed, automatically brings individual power supply channels up.
 
Color Grey
Depth 8" (203.2 mm)
Height 1.75" (44.5 mm)
Weight 4.5 lbs (2.04 kg)
Width 8.2" (208.3 mm) 
 Telex MCP-1
Dual Rack Mount Kit
G&G Price: $122.00
Want a better price?
For Use with SSA-324/SSA-424  
 Telex MCP-2
Dual Rack Mount Kit
G&G Price: $122.00
Want a better price?
For Use with SSA-324/SSA-424  
 Telex MCP-3
Console-Mount Kit
G&G Price: $138.00
Want a better price?
For One-Main Component  
 Telex MCP-8
Side Channels
G&G Price: $56.00
Want a better price?
 
 
?

TELEX BTR800RTS

BTR800

The Telex Radiocom BTR-800 UHF wireless intercom system is truly remarkable. The rackmountable BTR-800 transmitter offers a long list of standard features unavailable on other systems, such as: full UHF operation, two intercom-channel access from each of up to (4) duplex beltpacks (#TR825 sold separately), stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk/listen headset station and more. With a combination tone code/RF noise squelch and DSP digital audio processing, this wireless transmitter sounds great, even at a great distances! Combine all of that with an easy-to-use graphical interface that lets you get started right out of the box, and you've got the most innovative and versatile intercom system around. The BTR-800 is compatible with Telex, RTS and Clear-Com hardwired communications systems. Call and talk to your sales representative today.
Note: photo shown with receiver modules, not included.

TELEX TR-800 RTS腰包:

TELEX BTR-800基站:

Description
TELEX RTS TW INTERCOM BELTPACKS
BP325 Dual Channel Beltpack
The BP325 is the most commonly used RTS belt-pack. It offers two independent channels of full-duplex intercom, and provides the necessary amplification to drive mono or stereo format headsets to suit the application. With its comprehensive microprocessor assisted programming it may be configured to suit different situations. Easy to use, lightweight, and compact, it is built to withstand the rigours of life in the professional environment. As well as the standard grey colour, this model is also available in black.

Features:
- Stereo or mono operation - User programmable functions, microprocessor assisted - Speak to channels 1 and 2 separately or simultaneously - Separate listen level controls for each channel - Separate Talk buttons with green LED indicator for each channel - Talk buttons offer latching and non-latching modes - Mic amp limiter-circuit protects against overloads and signal distortion - Internal adjustments for side-tone on each channel - Call function allows call signal to be sent and received between stations - Remote 'mic-kill' signal (24kHz) generate/recognition facility - Mono and stereo headphone outlets on bottom panel, 4-pin and 5-pin XLR - Input and loop-through 3-pin XLR sockets on bottom panel - 'Programme' audio input (local belt-pack use only) with dedicated level control - Rugged, lightweight, high impact polycarbonate case

The operator may adjust the level of channel 1 and 2 in his headset using the two independent volume controls. He or she can communicate on channel 1 and 2 individually or simultaneously using the two separate Talk buttons and may latch the microphone in the open position or choose for it to mute when the channel Talk button is released. The level of the microphone signal (side-tone) heard in the headsets may be adjusted internally. The call-light button may be used to attract the attention of other users on a selected channel. If another operator calls, the red call-light flashes brightly while a green LED identifies which of the two channels is calling. If a microphone elsewhere on the system has been left open in a noisy surrounding, the 'mic-kill' facility on the BP325 can be used to shut down all open microphones on that channel providing the other stations support this feature. Programme audio may be injected into the beltpack via the 'loop-through' 3-pin XLR on the bottom panel. Internal jumpers change the function of the XLR connector and assign programme audio to headphone left, right or both. A dedicated level control allows programme audio to be balanced against communications audio. This facility is local to the BP325 belt-pack only and no other user will hear the programme material. The high bridging impedance of the belt-packs (10,000 ohms typically) ensures that system audio levels are not altered as units are taken in and out of circuit.

Power: +18 to +35 volts DC
Dimensions: 96.3(w) x 52.1(d) x 127(h)mm 
Weight: 0.255 kg

BP319 Single Channel Belt-Pack
The recently introduced BP319 belt-pack supercedes the BP318. It is microprocessor controlled and, like its predecessor, it offers a single channel of full-duplex communication. By popular demand, a second XLR connector has been added to allow belt-packs to be looped together. The BP319 is supplied with either a 4-pin or 5-pin XLR headset outlet. The two types are listed below as separate items. As well as the standard grey colour, these models are also available in black.

Features:
- Single channel operation - User programmable functions, microprocessor assisted - Level control for headset volume - Talk button offers latching and non-latching modes - Mic amp limiter circuit protects against overloads and signal distortion - Internal adjustment for side-tone - Call function allows call signal to be sent and received between stations - Audible 'incoming call-alert' feature, front panel selectable - Remote 'mic-kill' signal (24kHz) recognition facility, front panel selectable - Headset outlet on bottom panel, 4 or 5-pin XLR (choose when ordering) - Auto-sensing headset outlet detects if a mic is dynamic or electret and will automatically power an electret mic. - Communications in and loop-through sockets on bottom panel (3-pin XLR) - Rugged, water resistant aluminium case

Pressing the Talk button allows communication with other stations and the operator may latch the microphone in the open position or choose for it to mute when the channel Talk button is released. Audio level in the headset is adjusted with the dedicated volume control. The level of the operator’s own voice heard in the headset (side-tone) may be adjusted with a small screwdriver. Pressing the call button will attract the attention of other operators. If another station calls, the belt-pack’s red LED call light will illuminate. An audible call alert in the headset may be programmed to sound. Mic-kill is a facility which allows all open mics on a communications channel to be switched to mute. It is used to shut down microphones that have been inadvertently left open in noisy surroundings. Suitably equipped master stations generate a 24kHz tone mic-kill tone which the BP 319 can recognise, although it cannot initiate them. In the event of a mic-kill signal being received, if the belt-pack’s microphone is open it will automatically revert to mute until the Talk button is pressed again. Mic-kill recognition may be switched off if necessary.

Power: +18 to +35 volts DC
Dimensions: 100.0(w) x 35.0(d) x 115.0(h)mm 
Weight: 0.35 kg

BP351 Two Channel (Selectable) Belt-Pack
The recently introduced BP351 beltpack supercedes the BP350. It is microprocessor controlled and, like its predecessor, it can be selected to operate on either of the two available full-duplex intercom channels. By popular demand, a second XLR connector has been added to allow belt-packs to be looped together. The BP351 is supplied with either a 4-pin or 5-pin XLR headset outlet. The two types are listed below as separate items. As well as the standard grey colour, these models are also available in black.

Features:
- Two channel (selectable) operation - User programmable functions, microprocessor assisted - Level control for headset volume - Talk button offers latching and non-latching modes - Mic amp limiter-circuit protects against overloads and signal distortion - Internal adjustment for side-tone - Call function allows call signal to be sent and received between stations - Audible 'incoming call-alert' feature, selectable on front panel - Remote 'mic-kill' signal (24kHz) recognition facility, selectable on front panel - Headset outlet on bottom panel, 4 or 5-pin XLR (choose when ordering) - Auto-sensing headset outlet detects if a mic is dynamic or electret and will automatically power an electret mic. - Communications in and loop-through sockets on bottom panel (3-pin XLR) - Rugged, water resistant aluminium case

The channel-select button allows the operator to decide which of the two available communications channels is active. If simultaneous communications with both channels is required please refer to the BP325 headset station description. Pressing the Talk button allows communication with other stations. The operator may latch the microphone in the open position or choose for it to mute when the channel Talk button is released. Audio level in the headset is adjusted with the dedicated volume control. The level of the operator’s own voice heard in the headset (side-tone) may be internally adjusted with a small screwdriver. Pressing the call button will attract the attention of other operators. If another station calls, the belt-pack’s red LED call light will illuminate. An audible call alert in the headset may be programmed to sound. Mic-kill is a facility which allows all open mics on a communications channel to be switched to mute. It is used to shut down microphones that have been inadvertently left open in noisy surroundings. Suitably equipped master stations generate a 24kHz tone mic-kill tone which the BP 351 can recognise, although it cannot initiate them. In the event of a mic-kill signal being received, if the belt-pack’s microphone is open it will automatically revert to mute until the Talk button is pressed again. The mic-kill recognition may be switched off if necessary.

Power: +18 to +35 volts DC
Dimensions: 100.0(w) x 35.0(d) x 115.0(h)mm 
Weight: 0.35 kg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TELEX  有线腰包BP319

 

 

 

 代理商:北京艺恒利电子科技有限公司

TEL:010-58347627,52875915,80502584

 

 

 

 

 

 

 

 

 

1226andasi

 

 

顾客评论关闭
购买过该商品的用户才能进行评论 我要评论 顾客评论 0人评论,查看所有评论
商品满意度:
5分
    暂无评价信息
我要提问 买家问答 0条记录浏览所有问答
买家问答关闭
换一张
新手上路
顾客必读
会员等级折扣
订单的几种状态
积分奖励计划
商品退货保障
专业音乐制作方案
个人工作室解决方案
如何付款/退款
非会员购物通道
体贴的售后服务
网站使用条款
网站免责声明
简单的购物流程
如何支付
配送方式
支付方式
配送方式
订单何时出库?
网上支付小贴士
关于送货和验货
售后服务
会员注册协议
售后服务
隐私保护政策
常见问题
哪些城市可以货到付款?订单完成后多长时间送达?
配送费如何收取?
Powered by 360Shop   |  本商城全面支持支付宝 服务

★★★北京艺恒利电子科技有限公司致力于专业音频设备:调音台、功放、音箱、电容话筒、无线采访话筒、无线话筒、采访麦克风、录音话筒、猪笼挑杆、会议系统、导览系统、同声传译系统、声卡、监听耳机、MIDI键盘、电话藕合器、导播通话系统、无线监听系统等,并承接各音响灯光、会议室、演播室工程。品牌有:RODE、ICON艾肯、逊卡XUOKA、极致维JZW、雅玛哈YAMAHA、EV、CAD、M-AUDIO、SAMSON山逊、思美、JTS、真力、美奇MACK、ALTO、ALESIS、BOSE、JBL、TC、SOUNDCRAFT、舒尔SHURE、森海塞尔、SENNHEISER、AKG、SABINE、咪宝MIPRO、皇冠、声艺、AZDEN、DOD、DBX......ADD:北京空港工业区A区,

TEL:13366077705,15801647102,010-58347627,010-52875916Http:\\www.bjsound.com★★★

版权所有:北京艺恒利电子科技有限公司    地址:北京市朝阳区五里桥二街北京像素南区8号楼1415室       京ICP备10015661号-1

百度sitemap入口:sitemap_baidu.xml

【9:00-21:30】