【正品现货】美奇MACKIE PPM608 8通道现场功放调音台 ppm608,ppm1008和ppm1012全能超轻型调音台,每一个ppm调音台都具备两个高性能的强劲电源,为主输出与监听输出提供十足的动力。(ppm608调音台功率是500w+500w;ppm1008/1012调音台功率是800w+800w)。最大能达到1600瓦特,这样的设计,能为用户提供充足的原动力。 Mackie PPM608 正面倾斜图 Mackie PPM608 侧面图 Mackie PPM608 侧面图 每一款调音台产品都采用了定制的D类快速恢复功率Mackie Class-D Fast Recovery™放大器,该放大器比它的前辈散热更好。具有一整套的缩混工具,包括Mackie前置放大器,两个内置的DI接口盒,三段有源均衡器,全新的内置式压缩器和板载32比特RMFX+效果处理器,其提供了完整的混响、合唱和多触点延时等效果处理。
Mackie PPM608 背面图 主要特性:
-内置两个强劲的d级快速恢复前级电源 -优质的mackie前级话放 -采用了mackie vlz3的3段eq -通道具有独立的插入接口 -专用的内部线路压缩器,不仅快捷而且保证了ppm调音台的动态 -齐整的双图示均衡,恒定q值过滤器 -快速反应的高解析度12段led电平指示灯 -rmfx32比特精确度数字立体声效果处理器拥有24个预置效果器。混响,合唱与tap延迟,这些很重要的效果,可以满足现场的使用。 Ultra-light and completely self-contained, the Mackie PPM608 Professional Powered Mixer features two ridiculously robust power amps for mains and/or monitors (500W + 500W). With 1000 watts of system power, this mixer provides more raw power than the competition. Things can get pretty intense out there and your gear needs to be able keep up the pace. We custom designed the PPM608 with Class-D amps, which run cool and boast maximum efficiency to keep your sound pumping until they start kicking people out. We had to include Mackie’s proven Fast Recovery circuitry, eliminating the risk of pesky amp latching. The result is a distortion free mix even when pushing peak levels. The built-in limiter can go toe-to-toe with the most popular outboard stereo limiters used in live sound today, protecting your speakers from damage. The limiter’s attack and release times are specifically selected to address full-bandwidth music and will not muddy things up by adding any unwanted pumping. PPM mixers are surprisingly lightweight, but tremendously powerful. You can push the PPM608 to its maximum output, distortion free!
The Right Tools For The Job
Most powered mixers out there have either a limited set of mixing tools—keeping your mix decidedly average—or they cram in a mind-boggling amount of lame effects that you would never use. Every professional carries the right tools for the job, so the PPM608 comes with a great-sounding, highly useable toolkit:
- Premium Mackie preamplifiers ensure transparent, low-noise/high-headroom characteristics right at the front of the mixer. The PPM608 offers 8 mic/line channels with trusted Mackie preamplifiers.
- True 48V phantom power allows every condenser mic to perform at its full potential.
- Legendary 3-band active EQ straight off the tremendously popular VLZ3 mixer series. Sweetening any channel is a breeze.
- Individual channel inserts (ch. 1-6) allow compressors and other outboard processing on critical instrument or voice channels. Don’t leave the lead singer hanging!
- Dedicated in-line compressors on channels 1-4 bring simple but sweet dynamics to our PPM mixers.
- Dual graphic EQs are provided for both mains and monitors. These EQs feature tight, constant-Q Filters that effect only the frequency range you’ve intended, unlike many inexpensive built-in graphic EQs that will remain nameless.
- Simple stuff like useable main and monitor output metering make a huge difference in your mix. Sorry, but 5 LED meters at the output doesn’t tell you that you’re about to clip. Our high-resolution 12-segment meters enable more visibility of your signal, and the super quick response of the meters allows what you see to translate quickly and easily to what you hear.
“Gig Ready” Effects
The all-new RMFX+ (Running Man FX) 32-bit effects processor brings “gig ready,” useable effects to your mixes. Why scroll through hundreds of bizarre effects, like “ghost ambience?” Yeah, like anyone even knows what that means. Or how about winners like “delay+phaser2”, which you’ll never use in a million years. Those other mixers will leave your fingers raw from all the scrolling you have to do. The RMFX+ processor features 24 solid FX that are known for their utility and usability. Small, medium and large room reverbs with the choice of a warm or bright characteristic put your mix in the right space. Simple, rich choruses and an array of practical delays enable you to create professional mixes without requiring a two-hour sound check. Also, the RMFX+ is the first onboard processor to feature a user tap function. So if you want to use a delay, but our preset delay time doesn’t work, you can tap it in instantly! Basically, we’ve delivered a full rack of gear at your fingertips that is easy to master, allowing you to look and sound really good at your next gig. Really, really good.
Absolutely Armored
The PPM608 is fully armored inside a solid steel chassis, helping to protect the electronics from any potential environmental hazard (Think beer.) Extremely durable polycarbonate ABS end caps will protect the PPM608 from years of abuse caused by tossing it in and out of the truck or falling off the stool at rehearsal. Each PPM608 features rounded front with recessed controls, so if it rolls on its face in the van or gets kicked over at the show, you can be sure that it will emerge damage-free. Two metal side handles allow you to easily pick it up and get going. It’s ultra-light so you won’t need both hands!
Matching Made Easy
Look, Mackie want to make things as easy for you as possible. Matching speakers to amps can suck the fun out of an otherwise pleasant trip to the music store. Keeping that in mind, PPM mixers and Mackie passive speakers were made for each other. From our popular C series (C300/200) to our S series (S200), we designed our mixer to match the power requirements of our passive speakers perfectly. Try driving a pair of S215 2-way 15 inch speakers off someone else’s mixer. You can almost smell the smoke now! Yet this is child’s play using a PPM608. We easily provide enough power for a complete system. In fact, we’ve got the bollocks to drive two of our S215 15” 2-way speakers off the mains AND a pair of C300s as monitors without needing outboard amps. Others may try but, ultimately, don’t provide the necessary power.
So if you want a truly professional set of tools for your next gig, including a Mackie mixer, onboard compressors, Fast Recovery amplification, twin graphic EQs, and “gig-ready” effects, pair up a PPM608 and any Mackie Precision Passive loudspeakers for the ultimate, portable, professional P.A. system.
Technical Info
Dual 500W Mackie designed Class-D, Fast Recovery power amplifiers
32-bit RMFX+ processor featuring 24 sane, useable reverbs, choruses, and tap delay for live applications
8 premium Mackie mic preamps with 48V phantom power and TRS inserts (ch 1-6)
New Single In-line Compression (SIC) provides increased presence and punch for vocals and instruments
2 stereo inputs with dual RCA and dual 1/4-inch line inputs for flexible connectivity
Mackie’s Musical 3-Band Active channel EQ (80hz, 2.5kHz, 12kHz)
2 built-in DI boxes for direct instrument connections
Separate Monitor and FX auxiliary sends
12 segment LEDs for the Main and Monitor outputs
Dual 7-Band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes
3-Mode Amplifier for ultra-flexible routing, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 & Mon 2
Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers
Rugged metal handles built into the sides of the mixer case for easy transport from gig to gig.
Classic Mackie rounded front chassis design. If the PPM rolls on its face during transport the controls are recessed and protected
Ultra-Lightweight and portable (xx lbs/ xx kg) 主要特性: -内置两个强劲的d级快速恢复前级电源 -优质的mackie前级话放 -采用了mackie vlz3的3段eq -通道具有独立的插入接口 -专用的内部线路压缩器,不仅快捷而且保证了ppm调音台的动态 -齐整的双图示均衡,恒定q值过滤器 -快速反应的高解析度12段led电平指示灯 -rmfx32比特精确度数字立体声效果处理器拥有24个预置效果器。混响,合唱与tap延迟,这些很重要的效果,可以满足现场的使用。 010-58347627 80502584 QQ1148052600 3354665.005600.54
|