M1250 Mini Hypercardioid Condenser Mic The Audix M1250 delivers superb sound. It has a fully integrated preamp and detachable cable, as well as strong shielding from interference. It's a great overhead mic for choir and group vocals, on acoustic instruments, for ambient room miking, symphonic area miking, speech presentations, cymbals, and more.
MicroBoom Arm The MicroBoom arm combines with the M1250 condenser microphone to become an ideal solution for discreet, overhead miking. This 50-inch carbon fiber boom attaches to any microphone stand, and it weighs in at only 2.5 ounces. Carbon fiber is one of the most lightweight and durable materials on the planet - which is why it's being used to make parts for race bikes, aerospace crafts, motorcycles, and more. The MicroBoom is certainly discrete, but it's also rugged - it has a mini-XLR connector to securely hold the microphone in place while high-quality Mogami cable is used internally to deliver excellent sound to the bottom of the boom, where a mini-XLR male connector awaits.
Audix MicroBoom MB1250 HC Features: MicroBoom Stand - Less than .3 inches diameter
- 2.5 ounces
- Made of Carbon Fiber
M1250 Condenser Microphone:
- Transducer Type: Condenser
- Frequency Response: 80 Hz - 20 kHz
- Polar Pattern: Hypercardioid
- Output Impedance: 150 ohms
- Sensitivity at 1k: 7.8 mV/ Pa (-42 dbV +/-1.5 dB)
- Recommended Load Impedance: > 1000 ohms
- Signal/Noise Ratio (A-weighted): 73 dB
- Equivalent Noise Level (A-weighted): 21 dB
- Maximum SPL @ .5% THD: 150 dB
- Dynamic Range: 129 dB
- Power Requirements: 48 - 52 V
- Connector: 3 pin mini-XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
- Housing / Finish: Brass / paint
- Weight: .6 oz / 17 grams
- Length: 1.97 inches / 50 mm
The Audix MicroBoom MB1250 HC is an all-in-one discreet overhead miking solution!
MicroBoom MB1250 HC Image Gallery
|