TC-Helicon HarmonyControl Guitar 处理器 HarmonyControl | Guitar实际上是一个吉他转MIDI设备,但它需要和你的合唱效果器配合使用。只要你的合唱效果器带MIDI接口,那么好了,你把HarmonyControl | Guitar跟合唱效果器通过MIDI线连接,把吉他输入插到HarmonyControl | Guitar上,然后HarmonyControl | Guitar输出的就是经过处理的声音了,你可以用吉他来控制合唱效果器的变化(因为吉他声音被转成MIDI信号去控制合唱效果器了),就是这么简单。 有了HarmonyControl | Guitar,你不仅可以边弹边唱,吉他输出的声音可以直接控制合唱效果器对你演唱声音处理的变化。这样吉他手可以决定合唱效果器的和声变化,如果用吉他事先弹一遍主旋律,HarmonyControl | Guitar会自动记录下和声变化,演出时就不怕跑调了。 当然前提是你必须有一个合唱效果器,比如TC-Helicon的VoiceLive, VoiceWorks, VoiceWorksPlus,或者任何一个其它牌子的带MIDI接口的合唱效果器。 HarmonyControl | Guitar gives your MIDI-equipped harmony processor new life by converting your guitar chords to MIDI. Now you can add harmony to more songs in your repertoire while you focus on playing and singing your best. Just connect standard guitar cables between HarmonyControl | Guitar and your guitar and amp then a MIDI cable (included) from HarmonyControl | Guitar to your harmony processor. Your pure guitar tone is unaffected. It’s working all the time so that when you lift the bypass on your processor, harmonies flow forth instantly.
VoiceLive users rejoice! For those of you accustomed to inputting key and scale with multiple footswitch presses, HarmonyControl | Guitar drastically simplifies this procedure. Now when you want to change key and scale in a preset, all you do is tap a footswitch on HarmonyControl | Guitar, play a guitar chord and it's done.
· Compatible with TC-Helicon, Digitech® and Korg® harmony processors
· No special pickup or cabling to your guitar
· Guitar pass through preserves guitar tone through your amp
· Easy Auto setup - no MIDI channel selection - with selected processors
· Uses leading edge polyphonic pitch detection
· Chromatic tuner
· Works with altered tunings
Tech Specs
Inputs
Analog Inputs 1/4” Phone Jack
Input Impedance: 1MΩ
Max Input Level 16 dBu @ 12V supply
Outputs
Analog Outputs 1/4” Phone Jack
Output Impedance 0 Ω, Sense 225 Ω
Max Output Level 16 dBu @ 12V supply
Dynamic Range 106/98 dB, 20 Hz to 20 KHz @ Input Level 16/-2 dBu, not A-weighted
THD < -90 dB (0.0032%) @ 1 kHz, I/O Level 16 dBu, Load > 2400 Ω
Frequency Response +0.1/-0.2 dB, 20 Hz to 20 KHz
Conversion Characteristics
Sample Rate 48 kHz
Converter AKM AK4620B
AD / DA Conversion 24 bit, 128x oversampling
MIDI
In/Out 5 pin DIN
EMC & Safety
Complies with: EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
Certified to: IEC 65, EN 60065, UL6500 and CSA E60065 CSA FILE #LR108093
Environment
Operating Temperature 32° F to 122° F (0° C to 50° C)
Storage Temperature -22° F to 167° F (-30° C to 70° C)
Humidity Max. 90 % non-condensing
Supplementary
Dimensions 130mm x 132mm x 41mm (5" x 5.25" x 1.5")
Weight 1.5 lb. (0.72 kg)
Warranty Parts and labor 1 year
TEL:13366077705 QQ:156552252 33546651650xing12263910136679 122652088005
|